| Specification |
Metal Coating: Copper;
Mode of Production: SMT;
Layers: Double-Layer;
Base Material: FR-2;
Customized: Customized;
Condition: New;
Rated Power: 1000W;
Peak Power: 2000W;
Waveform: Pure Sine Wave;
Input Voltage: 12V/24V/36V/48V;
Output Voltage: 110V/220V;
Frequency: 50Hz/60Hz;
Keywords: Inverter AC PCB Board;
Communication: R485/R232/Can;
LCD Display: Optional;
Dimension: Customizable;
Power: Customizable;
Charging Current: Customizable;
Cooling System: Intelligent Fan;
|
Metal Coating: Copper;
Mode of Production: SMT;
Layers: Multilayer;
Base Material: FR-4;
Customized: Customized;
Condition: Used;
Insulation Materials: Organic Resin;
Functional Testing: Spi, X-ray, Aoi, Ict, Fct, RoHS and Aging;
Processing Technology: Electrolytic Foil;
Type: Rigid PCB;
PCBA Min.IC Pitch: 0.30mm(12mil);
BGA Minimum Dia: 01015;
PCBA Foot Pin: So, Sop, Soj, Tsop, Tssop, Qfp, BGA and U-BGA;
Small Order: Acceptable;
IP Protection: Strong Believe in IP Protection with Proven Record;
|
Metal Coating: Copper;
Mode of Production: SMT;
Layers: Multilayer;
Base Material: FR-4;
Customized: Customized;
Condition: Used;
Insulation Materials: Organic Resin;
Functional Testing: Spi, X-ray, Aoi, Ict, Fct, RoHS and Aging;
Processing Technology: Electrolytic Foil;
Type: Rigid PCB;
PCBA Min.IC Pitch: 0.30mm(12mil);
BGA Minimum Dia: 01015;
PCBA Foot Pin: So, Sop, Soj, Tsop, Tssop, Qfp, BGA and U-BGA;
Small Order: Acceptable;
IP Protection: Strong Believe in IP Protection with Proven Record;
|
Metal Coating: Copper;
Mode of Production: DIP SMT;
Layers: Multilayer;
Base Material: FR-4;
Customized: Customized;
Condition: New;
Quality Test: Aoi, 100% E-Test;
V- Cut Tolerance: +-10mi;
Bevel Edge: +-5mil;
Hole Location Tolerance: +-2mil;
Hole Diameter Tolerance: +-0.05mm;
Board Thickness Tolerance: +-5%;
Line Width/Space Tolerance: +-10%;
|
Metal Coating: Copper;
Mode of Production: DIP SMT;
Layers: Multilayer;
Base Material: FR-4;
Customized: Customized;
Condition: New;
Quality Test: Aoi, 100% E-Test;
V- Cut Tolerance: +-10mi;
Bevel Edge: +-5mil;
Hole Location Tolerance: +-2mil;
Hole Diameter Tolerance: +-0.05mm;
Board Thickness Tolerance: +-5%;
Line Width/Space Tolerance: +-10%;
|