| Specification |
Type: Piezoelectric;
Output Signal Type: Analog Output;
Accuracy Grade: 0.5G;
IP Rating: IP65;
Customized: Customized;
Sensor Type: Piezocrystal;
Frequency response(±1dB): 5~1000Hz;
Amplitude of nonlinearity: ±2%;
Transverse sensitivity rate: ≤5%;
Supply voltage: 15~36VDC (Normally 24);
Operation temp: -40~85℃;
limit of impact(peak value): 1000;
Weight: about 180g;
Shell material: stainless steel;
Sensitive element: Ceramic shear;
Connection cable: D13~3 meters;
|
Type: Inertial Measurement Unit;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 6;
Accuracy Grade: 1.2degree/H;
IP Rating: IP67;
Customized: Non-Customized;
Range: Gyro: +450deg/S, Acc: +-16g;
Bias Instability: Gyro: 1.2deg/H, Acc: 50ug;
Working Temperature: -40~+85degc;
Interface: Uart;
|
Type: Inertial Measurement Unit;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 6;
Accuracy Grade: 0.6degree/H;
IP Rating: IP67;
Customized: Non-Customized;
Range: Gyro: +-500deg/S, Acc: +-40g;
Bias Instability: Gyro: 0.6deg/H, Acc: 30ug;
Working Temperature: -40~+85degc;
Interface: Uart;
|
Type: Inertial Measurement Unit;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 6;
Accuracy Grade: 0.6degree/H;
IP Rating: IP67;
Customized: Non-Customized;
Range: Gyro: +-500deg/S, Acc: +-40g;
Bias Instability: Gyro: 0.6deg/H, Acc: 30ug;
Working Temperature: -40~+85degc;
Interface: Uart;
|
Type: Inertial Measurement Unit;
Output Signal Type: Digital Output;
Measuring Shaft Quantities: 10;
Accuracy Grade: 1degree/H;
IP Rating: IP67;
Customized: Non-Customized;
Range: Gyro: +-4000deg/S, Acc: +-30g (X,Y),+-150g (Z);
Bias Instability: Gyro: 1deg/H, Acc: 30ug (X,Y), 120ug (Z) (Allan);
Working Temperature: -40~+85degc;
Interface: Uart;
|