What is OEM Plastic Injection Molding for Aftermarket Replacement Rear Light Lens
Price
Purchase Qty. Reference FOB Price
1-4 Pieces US$2,000.00
5-9 Pieces US$1,900.00
10+ Pieces US$1,850.00
Sepcifications
- Shaping Mode Injection Mould
- Surface Finish Process Polishing
- Mould Cavity Single Cavity
- Plastic Material ABS
- Process Combination Type Single-Process Mode
- Application Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware
- Runner Cold Runner
- Design Software UG
- Installation Fixed
- Certification ISO
- Standard HASCO
- Customized Customized
- Transport Package Safety Package
- Specification According to your drawing
- Trademark Customized
- Origin Guangdong, China
- OEM/ODM Acceptable
- Material of Steel P20, 718, 8407, Nak80, H13, S136, DIN 1.2738, DIN
- Gate Type Side Gate, Sub Gate, Pin Point Gate, Edge Gate etc
- Mold Cavity Single Cavity / Family Molds / Multi Cavity
- Quote According to Samples, Drawing and Specific Require
- Mould Life 1million Times
- Lead Time 15-45 Working Days
- Process Grinding, Milling, Drilling, etc.
- Injection Machine Tonnage 50t-3600t
Product Description
OEM Plastic Injection Tooling for Aftermarket Replacement Headlight Acrylic Lens Product Description: PLASTIC INJECTION PART BASIC INFORMATION Product Name High Precision Mould Product Material ABS, PA, PA66+30GF, PBT, PC, POM, PP, PE, MA,PVC,TPE,TPU etc Surface Requirement Smooth, ...
-
What Are Bubbles in Injection Molded Products?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
What Is Injection Molding Shrinkage?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024Injection molding shrinkage simply refers to how much the polymers will contract during the cooling phase. During the injection molding process, molten plastic material is injected into a mold cavity under high pressure, and when the plastic material cools, it shrinks as it solidifies. This shrinkage can cause the molded part to be smaller than the intended size, and have an uneven shape known as war-page. -
What Are Sink Marks in Plastic Injection Mold?By Dongguan Howe Precision Mold Co.,LTD on 11/09/2024Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit.