| Specification |
After-sales Service: 12month Warranty,Lifelong Technical Service;
Function: Inertial Sensors Testing;
Display: Digital;
Usage: Electric Component Tester, Inertial Components R&D;
Type: Motion Simulator;
Environment: Room Temperature;
Warranty: With Warranty;
Power Source: 380VAC/50Hz;
Weight: 2000kg;
Installation: Direct Connected;
Customized: Customized;
Load Weight: 20kg;
Load Mounting Table: 360mm;
Positioning Accuracy: ≤±5";
Inner Frame: ±500°/S;
Middle Frame: ±400°/S;
Outer Frame: ±300°/S;
Three-Axis Linkage: ±100°/S;
Rate Accuracy and Rate Stability: 1°≤W<10°/S, 5e-004(10° Average);
|
After-sales Service: Yes;
Function: Storage, Cleared;
Display: Digital;
Usage: Electric Component Tester, Catalytic Element Tester, Lightning Protection Device Tester;
Warranty: With Warranty;
Power Source: AC 85V-265V;
Weight: 0-10Kg;
Installation: Direct Connected;
Customized: Non-Customized;
Frequency: 10Hz-10kHz;
Accuracy: 0.05%;
|
After-sales Service: Yes;
Function: Storage, Cleared;
Display: Digital;
Usage: Electric Component Tester, Catalytic Element Tester, Lightning Protection Device Tester;
Warranty: With Warranty;
Power Source: AC 85V-265V;
Weight: 0-10Kg;
Installation: Direct Connected;
Customized: Non-Customized;
Frequency: 10Hz-10kHz;
Accuracy: 0.05%;
|
Function: Storage, Cleared;
Display: Digital;
Usage: Electric Component Tester, Catalytic Element Tester, Lightning Protection Device Tester;
Warranty: With Warranty;
Power Source: DC 100V-300V;
Weight: 0-10Kg;
Installation: Direct Connected;
Customized: Non-Customized;
Test Parameter: Z , Y , C, L, X, B, R, G, D, Q;
Frequency: 12Hz~200kHz;
Accuracy: 0.1%;
|
After-sales Service: 7*24 Online Service/Change New;
Function: Locating;
Display: Digital;
Usage: Calbe Fault Detector;
Warranty: With Warranty;
Power Source: AC200-240V;
Weight: 〉10Kg;
Installation: Direct Connected;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 7kg;
|