| Specification |
Type: Wireless Alarm Host;
Usage: Fire, Smoke;
Main Power: 110 VAC or 220VAC (±20%) 50Hz/60Hz;
Battery Low-Voltage Protection: 21V;
Temperature Range: -10 to 55°c (14~134°f);
Fuse for AC Power: 1A/250V Glass Tube Fuse, Slow Blow,5*20mm;
Terminal Blocks Rating: All Terminals Rated for 12 to 18 AWG (0.75 to 2.5m;
Number of Points on Each Loop: 128 PCS;
Relative Humidity: 5 to 95%, Non-Condensing;
Batteries: 2*12V, 2.3A Lead Acid Batteries;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Alarm;
Receive Frequency: 485/232;
Wiring Mode: Sub-Line System;
Weight: 7kg;
Color: Red;
Number of Zones: 4;
Primary AC: 90-270VAC 50/60Hz;
Standby Battery: 2*12V;
Power Supply Rating: 3 AMPS @24VDC;
Alarm&Fault Relay Rating: 2A & 30VAC , Resistive;
Normal Initiating Operating Voltage: 23VDC, Maximum 26VDC, Regulated;
Maximum Number of Detectors: 30;
Sounder Voltage(VDC): 27;
Maximum Sound Current Per Zone: 500mA;
Max. Sounder Sounder Number of Per Zone: 5;
Alarm Zone End of Line(Ohms): 10K;
Max. Auxiliary Supply Current (Ma): 500mA;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Alarm;
Wiring Mode: Sub-Line System;
Weight: 2.7kg;
Number of Zones: 2;
Primary AC: 90-270VDC;
Standby Battery: DC 12V/2.2ah * 2 (Not Include);
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
