| Specification |
Type: Gas Exintguishing Control Panel;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥90dB;
Wiring Mode: Sub-Line System;
Product Name: FM200/CO2 Gas Extinguishing Control Panel;
Main Power Supply: 90 to 270VAC, 50Hz;
Backup Battery: 2 PCS Lead Acid Battery;
Power Supply Rating: 3A@24VDC;
Initiating Device Circuits: 4 Detection Zones;
Notification Appliance Circuits: 2 Sounder Lines;
Zone Capacity: 25 - 30 Detectors;
Alarm Mode: 1st Stage and 2ND Stage;
Aux Voltage Supply: Permanent 24V and Reset 24V;
Relay Output: Fire, Fault, Extract Outputs;
Relay Contact Rating: 2A@30VDC;
Release Delay Time: Adjustable 0 to 75 Seconds;
Standard: EN54-2 & EN54-4;
Dimension: 383X295X87 mm;
Application: Computer Rooms, Data Center, Server Room etc.;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
Type: Fire Alarm Host;
Function: Networked;
Usage: Auto, Fire, Smoke;
Alarm Volume (within 1m): ≥100dB;
Networking Mode: Dial-up;
Receive Frequency: Wire;
Wiring Mode: Sub-Line System;
Main Supply: 90-270VAC, 50/60 Hz;
Number of System Zones: 4 Zone;
Panel Weight: 5kg;
Extinguishant Release Output: 21V-28VDC. Maximum Load 2 AMP;
Alarm Zone End of Line (Ohms): 10K;
Power Supply Rating: 3 AMPS Total Including Battery Charge 28V+/-2V;
Battery Type: Two 12 Volt Sealed Lead Acid in Series;
Battery Charge Voltage: 27.6VDC Nominal;
Battery Charge Current: 0.7A Maximum;
Maximum Current Draw From Battery: 3AMPS;
Fault Relay Contact Rating: 2A /30VDC Maximum for Each;
Fire Relay Contact Rating: 2A /30VDC Maximum for Each;
First Stage Contact Rating: 2A /30VDC Maximum for Each;
Second Stage Contact Rating: 2A /30VDC Maximum for Each;
Extract Contact Rating: 2A /30VDC Maximum for Each;
|
