| Specification |
Protection: Anti-static;
Installation: Vertical;
Housing: UPR;
|
Protection: Shock Resistance;
Installation: Hanging;
Housing: UPR;
Power Input: 180-250VAC or 180-250VDC,50/60Hz;
Control Output: Transistor: 12-24VDC, 40mA Max. Per Group Relay: 2;
Sampling Voltage (Three-Phase): 20-450VAC (L-L) Other Voltage Levels to Be Customi;
Sampling Current (Three-Phase): 5A or 1A Selectable;
Output Step: up to 15 Banks, Programmable, for Single-Phase or;
Harmonic Measurement Range: 2-50th Harmonic Voltage / 2-50th Harmonic Current;
Temperature Measurement Range: -40℃~+120℃;
Operating and Compensation Modes: Manual/Automatic, Programmable; Subcomplementary,;
Number of Rates: Maximum 16 Groups, Programmable;
Target Cosφ: 0.5 Inductive to 0.5 Capacitive Adjustable;
Protection Class: Front Panel: IP54 Rear Panel: IP30;
Installation Environment: Indoor Installation, Altitude Not Exceeding 2000 M;
Environmental Humidity: Daily Average Not More Than 95%, No Condensation O;
Operating Temperature: -10℃~+60℃;
Overall Dimensions: 144*144*100mm (W*D*H);
|
Protection: Shock Resistance;
Reactance Rate: 6%, 7%, 12%, 14% and Non-Standard Customization;
Low Temperature Rise: ≤70K;
Low Noise: ≤48dB;
Insulation Class: Class H (180°c);
Withstand Voltage: at 1.8in, The Inductance Value Is Not Less Than 0.;
Linearity: at 1.8in, The Inductance Value Is Not Less Than 0.;
Over-Temperature Protection: Nc125°c Temperature Control;
Execution Standards: GB/T1094.6 - 2011 "Reactors" IEC60076 - 6 Reactors;
|
Protection: Shock Resistance;
Reactance Rate: 6%, 7%, 12%, 14% and Non-Standard Customization;
Low Temperature Rise: ≤40K;
Linearity: at 1.8in;
Low Noise: ≤48dB;
Insulation Class: Class H (180°c);
Withstand Voltage: Between Phases and Between Phase and Ground, Apply;
Execution Standards: GB/T1094.6 - 2011 "Reactors" IEC60076 - 6 Reactors;
|
Protection: Shock Resistance;
Installation: Hanging;
Housing: UPR;
Power Supply Voltage: 220VAC±20%;
Power Supply Frequency: 50Hz±5%;
Sampling Voltage: 220V±20%;
Sampling Current: 0 - 5A;
Overall Power Consumption: 6W;
Control Output Contacts: DC 12V, 40mA, 220(380)V, RS485;
Sensitivity: 10mA;
Input and Cut-off Waiting Delay: 5s;
Cycle Switching Interval: 3600s;
Capacitor Discharge Time: 30s;
Protection Duration: 30s;
|
