USB3.0 Interface board  matched with SONY FCB-EV series

USB3.0 Interface board, Sony movement secondary development network coding control board, compatible with SONY FCB series HD integrated movement module, can be stored using TF card, can be applied to security, intelligent traffic flight equipment and video conference And other fields, and is one of the low-cost solutions for the existing PTZ from standard definition to high definition.
Designed for the SONY FCB digital high-definition movement module , the encoder board is connected via the LVDS interface ,and the  USB3.0 interface outputs 1080P60 HD video signals. Support 720P50/60 , 1080P25/30 , 1080P50/60 video formats and display in full screen. Supporting various functions such as direct control of camera zoom through the USB serial port is a must-have for SONY camera development engineers. And support a set of external serial port, convenient for various control panels to control the camera. Used in medical equipment and image detection equipment.
Size: 42MM*42MM*10MM

USB3.0 Interface board key feature

The new USB3.0 acquisition module is suitable for SONY FCB EV/EH series high-definition digital integrated camera movements and most digital movements with the same interface as FCB series movements.

Connect the movement through LVDS interface, automatically identify the HD video format of the movement. Support 720P 1080I 1080P frame rate, so that the SONY FCB integrated camera images immediately displayed on the computer screen.

USB3.0 output standard UVC protocol HD video, in Windows7 and Windows 10 systems are free of driver.

Video formats are 1080P60 1080P50 1080P30 1080P25 1080P10 720P60 720P50 720P30 720P25 720P20 720P10 800*600P50 800*600P30 800*600P25 640*480P60 640*480P50, suitable for all kinds of live broadcast programs and QQ, wechat, SKYPE and other instant messaging software.

6pin function interface

DC12V+ and GND are external standby power supply for positive and negative interface power supply range: DC9~12V (1.0A). TTL-RX and TTL-TX are TTL232 communication interfaces.

The voltage is 3.3V, and it communicates with MCU serial port. This communication interface can control the camera, and can also communicate with the serial port inside the USB by setting the switching port low.

Send all kinds of information from MCU to computer.

Frame synchronization interface: through the control of this interface, the frame frequency controlled output image is realized.

The USB3.0 interface is connected to the computer through the USB3.0 cable to realize the HD video signal, serial port control signal and power supply to the camera, and eliminate other communication and power supply cables. One thread solves all problems.

Steps for connecting the camera movement to the USB3.0 Interface board:

Step 1: Camera movement and LVDS cable connection

Step 2: Connect the LVDS cable to the USB3.0 acquisition card

Step 3: Connect the data line to the USB3.0 acquisition card interface